Prickwillow Museum
THE MUSEUM OF FENLAND DRAINAGE
  • Home
  • Plan a visit
    • Where to find us
  • Event days
  • Our collection
    • Mirrlees 5 cylinder blast injection
    • Allen T47 2-stroke
    • Allen 3S60 4-stroke
    • Allen 3 cylinder 76.6 bhp
    • Ruston & Hornsby single-cylinder horizontal engine 36 HP
    • Vickers Petter 2-stroke
    • Ruston Hornsby 9HRC
  • Engineering
    • Internal combustion
    • The 2-stroke cycle
    • The 4-stroke cycle
    • Blast injection
    • Pressure charging
  • Wind, Steam and Diesel
  • Schools
    • Wind, Steam and Dr Diesel
    • Rivers
    • Peter the Prickwillow Drainage Engine
  • Get involved
  • Contact us
  • Blog
  • Data Privacy Notice

Images of OuseFest

24/8/2016

0 Comments

 
 We're delighted to share some more fabulous images of this year's Ousefest Family Fun Day at the Museum. The images were taken by Adam Finch, and are copyright Ouse Washes Landscape Partnership, who funded and supported the event.

​Thanks to all who visited and took part in making this such a fantastic day.

For a full report, please read the previous blog post.

0 Comments

OuseFest 2016 & the re-launch of the Vickers Petter

9/8/2016

2 Comments

 
Picture
Picture
Face-painted young visitors enjoying our OuseFest 2016 family fun day. Image copyright Ouse Washes Landscape Partnership
There was a good turnout of both families and engine enthusiasts to the event day on July 24th giving a good cross section of people and a very friendly atmosphere. The percussion workshop was very popular, as was the RSPB nature trail, and the face painter was busy all day. All the family fun activities were free as part of the OuseFest, and included the opportunity to meet Cornelius Vermuyden and his secretary.
 
An undoubted highlight of the day was the re-launch of one of the most spectacular engines in our collection, the very rare 1921 Vickers Petter engine. It was re-started following 2 years of repair works, necessary after it developed a major fault in 2014.  It has always been a particular favourite with visitors since it requires blowlamps to heat up the cylinder heads before it can be started, and there was spontaneous applause when it was back in action.
 
The engine developed a lubrication problem which resulted in damage to the main bearings and one of the big end bearings which all needed recoating with white metal. After the engine was dismantled to discover the full extent of the damage, and funding secured, the bearings were sent away to STM Engineering to be machined, remetaled, peaned and machined back to size, complete with oil ways. During the works to rebuild the engine, by the Museum ‘Tuesday gang’ volunteers, all gaskets have been hand-made (20 O-ring & main copper per cylinder). A new oil pump has been installed and the cooling water rerouted. New blowlamps were needed and these were recast with a purpose made pattern by East Coast Casting. The fuel injectors needed to be sent away to be re-machined by Colchester Fuel Injection Ltd, at a generous discounted cost.

When the Vickers Petter was being put back together and trialled, water leaked from the seals on the cylinder heads. Two cylinder head gaskets had to be specially made by East Anglian Sealing Company Ltd to solve the problem.  After a few teething problems, which have been resolved, the engine now runs better than it has done for many years.  
 
We are very grateful to the Association for Industrial Archaeology for their grant, for donations from local companies and individuals, and for the many hours put in by our volunteers, which have made this restoration possible.
Picture
A volunteer starts the Vickers Petter, its first run in 2 years. Image copyright Ouse Washes Landscape Partnership
Paul Dunham, Chairman of Prickwillow Engine Trust
We are very grateful to people who attended the OuseFest Family Day and joined in the celebrations of the restarting of the Vickers Petter after two years restoration works. It was great to see so many people enjoying themselves, particularly the young, who will be the lifeblood of the Museum in the future.

 
John Jones, treasurer of AIA, Association for Industrial Archaeology, one of the major supporters of the project
This is a superb restoration of a historic engine and it is great that we have been able to assist the Museum in giving the engine another life.

 
Bob Lucas, volunteer engineer at the Museum
It was so rewarding to see the Vickers Petter back in action after all the hard work. The spontaneous applause from the visitors when it was started up made it all worthwhile.

 
Oscar Thomson, aged 10, a regular visitor
It was awesome – watching the flames start up the engine again was amazing!
2 Comments
    Picture

    RSS Feed

    Categories

    All
    100 Club
    CORONAVIRUS
    COVID-19
    Mike Petty
    Vickers Petter

    Archives

    February 2023
    May 2022
    October 2021
    August 2021
    July 2021
    June 2021
    May 2021
    March 2021
    December 2020
    October 2020
    September 2020
    July 2020
    April 2020
    June 2019
    March 2019
    October 2018
    April 2018
    August 2017
    April 2017
    November 2016
    October 2016
    August 2016
    May 2016
    April 2016
    October 2015

    Author

    Contributed by HistoryNeedsYou.

Powered by Create your own unique website with customizable templates.